|
Glass rotor flowmeter is mainly used in various sectors of chemical, petroleum, light industry, medicine, fertilizer, chemical, food, dyes, environmental protection and scientific research, etc., used to measure single-phase non-pulsating (liquid or gas) flow rate of the fluid. Corrosion-resistant type flowmeter is mainly used in corrosive liquid, gas medium flow most testing, such as strong acids (except hydrofluoric acid), alkali, oxidizing agents, strong oxidizing acids, organic solvents and other corrosive gas or liquid medium flow detection.
Features:
Pressure loss
Reliable performance. Easy to read and intuitive
A simple structure. Easy to install
cheap price
Technical Parameters:
Measuring media: liquids and gases
Nominal diameter: DN2 ~ DN100mm (after flow range reference table)
Accuracy: basic error of ± 4.0%, ± 2.5%, ± 1.5%
Measuring range: nominal diameter, the greater the flow
Working pressure: ≤0.4MPa, ≤0.6MPa, ≤1.0MPa
Degree range: 1:10, 1: 5
Medium temperature: 0 ~ 100 ℃
Glass Material: high boron silicon glass
Selection Code:
Normal: Mainly used for measuring non-corrosive medium;
Corrosion-resistant type: Mainly used for measuring corrosive media;
All stainless steel type: mainly for measuring hygienic and weak corrosive medium, resistant to the corrosive gas environment;
Corrosion-resistant stainless steel types: Tyvek mainly for measuring corrosive media, resistant to the corrosive gas environment.
GRF
Nominal diameter | Types of |
DN2 ~ DN100mm | A: Normal |
B: corrosion-resistant type, PTFE pedestal (for DN2 ~ 10) or PTFE-lined carbon steel flanges | |
C: normal full stainless steel type, in addition to glass and seals the outer | |
D: 316 All stainless steel type, in addition to glass and seals (for DN2 ~ 10) | |
E: stainless steel corrosion-resistant type, ordinary stainless steel flange lined PTFE (applicable to DN15 ~ 100) |
Example: GRF-50-B, DN50, corrosion-resistant type Glass rotor flowmeter.