Conductivity meter

Solution conductivity is a digital representation ability to conduct current. The total conductivity of the water contained in its inorganic acids, alkalis, the amount of salt have a certain relationship, when their low concentration, the conductivity increases as the concentration increases, therefore, the indicator often used to speculate ions in the water concentration or salinity. Conductivity is the physical meaning of the material conductive properties. The greater the conductivity of the conductivity, the stronger, the smaller the contrary. It can be widely used for continuous monitoring of thermal power, chemical fertilizer, metallurgy, environmental protection, pharmaceutical, biochemical, food and running water solution conductivity value.

Features

All intelligent, versatile, high-performance measurement, environmental adaptability;
Multi-parameter displayed simultaneously: Conductivity value, current value, time;
Fit a variety of types of constant measuring electrode;
Chinese factory standard configuration interface, the language of the menu, you can toggle Britain
Can be measured conductivity and temperature, 4 ~ 20mA transmission output, relay high and low alarm control output, RS485 communication output, and other variables output, intelligent control systems;
Precision automatic temperature compensation system, be free to adjust the electrical conductivity temperature compensation coefficient
Dual relay, conductivity and temperature can be controlled separately, the amount of hysteresis can be freely adjusted
High-performance CPU, good electromagnetic compatibility
Having a key to restore factory settings function
Transmitter Technical Data:

Measuring range: 
0-2μs / cm (J = 0.01cm-1) 
0-20μs / cm (J = 0.01cm-1) 
0-200μs / cm (J = 0.1cm-1) 
0-2000μs / cm (J = 1.0cm-1) 
Resolution: 
0.001μs / cm (10 or less) 
0.01μs / cm (10 or more) 
0.1μs / cm (100) 
1μs / cm (1000 or more) 
Temperature range: 0 ~ 60 ℃ 
Accuracy: ± 1.0% FS 
Repeatability: ± 1.0% FS 
Stability: ± 1.0% FS 
Ambient temperature: -20 ℃ ~ 55 ℃ 
Relative humidity: ≤85% 
Analog output: 4 ~ 20mA, maximum load 750Ω 
Digital output: RS485 (ModBus protocol) 
Switching output: relay output (dual optional) 
Capacity 220VAC / 5A 
Material: ABS 
Protection: IP65 
Power supply: AC220V ± 10% (or DC24V) 
Power frequency: (50 ± 5) Hz

Sensor technology parameters

Cell constant: 0.01 0.1 1.0 
Temperature range: 0 ~ 60 ℃ 
Temperature compensation: PT1000 
Pressure: 0.6Mpa 
Connection: 1/2 "or 3 / 4NPT thread Material: 316L or Molded installation: flow-through, immersion bracket Protection class: IP68 
Cable length: 10 m Standard (extended)

Selection coding

Host computer    sensor
F1: panel mounted    CS100: Constant 0.01
M1: Wall-mounted    CS200: Constant 0.1

CS300: Constant 1.0

CS400: constant 10